In-line analyzer for the determination of nitrates in water AquaTOS-UV-NO3

In-line analyzer for the determination of nitrates in water AquaTOS-UV-NO3
Manufacturer:
ЭКОХИМПРИБОР

Designed for continuous determination of nitrates (NO3) in water.
The measuring principle is based on the intense absorption of UV radiation with a wavelength of 220 nm by compounds containing an N-O bond (nitrates).

More
Category: Quantitative analyzers of impurities AquaTOS

Designed for continuous determination of nitrates (NO3) in water. The measuring principle is based on the intense absorption of UV radiation with a wavelength of 220 nm by compounds containing an N-O bond (nitrates). Turbidity, suspended solids and impurities in the flow cell are automatically compensated for by a reference measurement at a different wavelength (270 nm). Analytical systems are mounted in block-boxes or cabinets manufactured by TOS-Technologies LLC with the necessary life support systems.

Advantages compared to immersion sensors:

  • Measurement interval from 1 minute;
  • Reagent-free technique;
  • Reliable operation without maintenance for several weeks;
  • High measurement accuracy even at low concentrations;
  • Simple maintenance that does not require special skills;
  • Touch screen control;
  • Automatic calibration and verification of the correctness of the readings;
  • Automatic cleaning with a programmable cycle;
  • Analysis in a wide range of measured concentrations;
  • Analysis of two or more streams on one device;
  • Low running costs.
  • Measurement range: 0.02 - 1000 mg / l

Designed for continuous determination of nitrates (NO3) in water. The measuring principle is based on the intense absorption of UV radiation with a wavelength of 220 nm by compounds containing an N-O bond (nitrates). Turbidity, suspended solids and impurities in the flow cell are automatically compensated for by a reference measurement at a different wavelength (270 nm). Analytical systems are mounted in block-boxes or cabinets manufactured by TOS-Technologies LLC with the necessary life support systems.

Advantages compared to immersion sensors:

  • Measurement interval from 1 minute;
  • Reagent-free technique;
  • Reliable operation without maintenance for several weeks;
  • High measurement accuracy even at low concentrations;
  • Simple maintenance that does not require special skills;
  • Touch screen control;
  • Automatic calibration and verification of the correctness of the readings;
  • Automatic cleaning with a programmable cycle;
  • Analysis in a wide range of measured concentrations;
  • Analysis of two or more streams on one device;
  • Low running costs.
  • Measurement range: 0.02 - 1000 mg / l
Our contacts
pin_drop
г. Москва, Бережковская набережная,16А стр.3
show on the map
schedule
пн-пт с 9 до 18
Отдел сервисного обслуживания
pin_drop
г. Дубна, ул. Университетская, д. 11, стр. 14
show on the map
schedule
пн-пт с 9 до 18
Отдел сервисного обслуживания

    Contact us