385+ Three-Pin pH/ORP Sensor

385+ Three-Pin pH/ORP Sensor
Manufacturer:
Emerson

385+ model sensor manufactured by Rosemount Analytical is designed for better sensor diagnostics when used in combination with 54 model of pH/ORP sensor. Improved sensor diagnostics allows to carry out preventive maintenance indicating the necessity to replace the worn-out sensor or clean the sensor to maintain optimum performance. 385+ model sensor i9s applied to take measurements of рН or Redox potential in pipelines, open tanks and reservoirs. 385 model casing is made of chemically resistant TEFZEL coating on titanium pipe. Extractable option is designed for application areas where diversion of substance flow is not possible or very difficult. This sensor is designed for application in combination with standard 1-1/2” ball valve.

More
Category: General purpose sensors

385+ model sensor manufactured by Rosemount Analytical is designed for better sensor diagnostics when used in combination with 54 model of pH/ORP sensor. Improved sensor diagnostics allows to carry out preventive maintenance indicating the necessity to replace the worn-out sensor or clean the sensor to maintain optimum performance. 385+ model sensor i9s applied to take measurements of рН or Redox potential in pipelines, open tanks and reservoirs. 385 model casing is made of chemically resistant TEFZEL coating on titanium pipe. Extractable option is designed for application areas where diversion of substance flow is not possible or very difficult. This sensor is designed for application in combination with standard 1-1/2” ball valve.

Technological information and specifications
Wetted materials  Tefzel, titanium, EPDM, 316 stainless steel, Viton, glass, ceramics.

platinum (only for Redox).

Process connection of sensor  1-1/2 in. with ball valve;

1 in. without ball valve;

Percentage linearity as per pH range  Option 10 Option 11
0-2 pH 94% 94%
2-12 pH 99% 97%
12-13 pH 97% 98%
13-14 pH 92% 98%
Measurement range  ACCUGLASS™ from 0 to 14pH

Redox ± 1 500 mV

Maximum pressure during removal or installation
(option with ball valve)
542 kPa (absolute)
Maximum pressure / nominal temperature  790 kPa (absolute) at 100°C
Weight / gross weight Immersion/cut-in 0.7kg /1.25 kg

Extractable: 2.7 kg/5.0 kg

Ball valve: 2.25 kg/4.5 kg

385+ model sensor manufactured by Rosemount Analytical is designed for better sensor diagnostics when used in combination with 54 model of pH/ORP sensor. Improved sensor diagnostics allows to carry out preventive maintenance indicating the necessity to replace the worn-out sensor or clean the sensor to maintain optimum performance. 385+ model sensor i9s applied to take measurements of рН or Redox potential in pipelines, open tanks and reservoirs. 385 model casing is made of chemically resistant TEFZEL coating on titanium pipe. Extractable option is designed for application areas where diversion of substance flow is not possible or very difficult. This sensor is designed for application in combination with standard 1-1/2” ball valve.

Technological information and specifications
Wetted materials  Tefzel, titanium, EPDM, 316 stainless steel, Viton, glass, ceramics.

platinum (only for Redox).

Process connection of sensor  1-1/2 in. with ball valve;

1 in. without ball valve;

Percentage linearity as per pH range  Option 10 Option 11
0-2 pH 94% 94%
2-12 pH 99% 97%
12-13 pH 97% 98%
13-14 pH 92% 98%
Measurement range  ACCUGLASS™ from 0 to 14pH

Redox ± 1 500 mV

Maximum pressure during removal or installation
(option with ball valve)
542 kPa (absolute)
Maximum pressure / nominal temperature  790 kPa (absolute) at 100°C
Weight / gross weight Immersion/cut-in 0.7kg /1.25 kg

Extractable: 2.7 kg/5.0 kg

Ball valve: 2.25 kg/4.5 kg

Our contacts
pin_drop
г. Москва, Бережковская набережная,16А стр.3
show on the map
schedule
пн-пт с 9 до 18
Отдел сервисного обслуживания
pin_drop
г. Дубна, ул. Университетская, д. 11, стр. 14
show on the map
schedule
пн-пт с 9 до 18
Отдел сервисного обслуживания

    Contact us