222 inductive conductivity sensor

222 inductive conductivity sensor

222 model sensors are based on carbon steel pipe with Teflon coating. One or two inch pipes with 150 and 300 psi class flanks as per ANSI standard can be used for manufacturing of these sensors. Sensor has a separate thermal sensing element applicable for installation in thermowell. 222 model sensors are used in sampling systems at high pressure and temperature. Rosemount Analytical 222 model toroidal conductivity sensors can be used in various technology processes where characteristics of ordinary sensors with electrodes exposed process medium can significantly degenerate due to chemical or physical nature of the solutions.

More
Category: Inductive sensors

222 model sensors are based on carbon steel pipe with Teflon coating. One or two inch pipes with 150 and 300 psi class flanks as per ANSI standard can be used for manufacturing of these sensors. Sensor has a separate thermal sensing element applicable for installation in thermowell. 222 model sensors are used in sampling systems at high pressure and temperature. Rosemount Analytical 222 model toroidal conductivity sensors can be used in various technology processes where characteristics of ordinary sensors with electrodes exposed process medium can significantly degenerate due to chemical or physical nature of the solutions.

Technological information and specifications
Minimum conductivity with 5081T analyzers 500 µS/cm
Maximum m conductivity with 5081T analyzers 2000 µS/cm
Mounting type Flow-type
Temperature Max. 182°C
Maximum recommended operating pressure 862.5 kPa absolute at 182°  for 150 pounds flange adapter

1725 kPa absolute at 182°  for 300 pounds flange adapter

 

Fabrication materials Carbon steel with teflon coating

 

One-piece cable length 6.1 m
Process connection 1 inch, 150 or 300 pounds flange adapter as per ANSI standard
2 inches, 150 or 300 pounds flange adapter as per ANSI standard
Weight / gross weight 1 inch pipe diameter, 150 pounds flange adapters: 5.0 kg/6.3 kg
1 inch pipe diameter, 300 pounds flange adapters: 7.6 kg/9 kg
2 inch pipe diameter, 150 pounds flange adapters: 14.6 kg/16.6 kg
2 inch pipe diameter, 300 pounds flange adapters: 15.7 kg/17.8 kg

222 model sensors are based on carbon steel pipe with Teflon coating. One or two inch pipes with 150 and 300 psi class flanks as per ANSI standard can be used for manufacturing of these sensors. Sensor has a separate thermal sensing element applicable for installation in thermowell. 222 model sensors are used in sampling systems at high pressure and temperature. Rosemount Analytical 222 model toroidal conductivity sensors can be used in various technology processes where characteristics of ordinary sensors with electrodes exposed process medium can significantly degenerate due to chemical or physical nature of the solutions.

Technological information and specifications
Minimum conductivity with 5081T analyzers 500 µS/cm
Maximum m conductivity with 5081T analyzers 2000 µS/cm
Mounting type Flow-type
Temperature Max. 182°C
Maximum recommended operating pressure 862.5 kPa absolute at 182°  for 150 pounds flange adapter

1725 kPa absolute at 182°  for 300 pounds flange adapter

 

Fabrication materials Carbon steel with teflon coating

 

One-piece cable length 6.1 m
Process connection 1 inch, 150 or 300 pounds flange adapter as per ANSI standard
2 inches, 150 or 300 pounds flange adapter as per ANSI standard
Weight / gross weight 1 inch pipe diameter, 150 pounds flange adapters: 5.0 kg/6.3 kg
1 inch pipe diameter, 300 pounds flange adapters: 7.6 kg/9 kg
2 inch pipe diameter, 150 pounds flange adapters: 14.6 kg/16.6 kg
2 inch pipe diameter, 300 pounds flange adapters: 15.7 kg/17.8 kg