Cut-in type 400 model sensors are produced with cell constant 0.01/cm, 0.1/cm, 1.0/cm. Sensors are ideally suited for monitoring concentration of solids dissolved in colling water and in case of reduction of temperature, pressure, for measurement of solids dissolved in boiler and potable water. 400 model sensors can be also used for monitoring of characteristics of reversed osmose and ion-exchange demineralizers.
| Technological information and specifications |
| Characteristics |
MODEL
400/400 VP |
MODEL
02/402 VP |
MODEL
403/403 VP |
MODEL
404 |
| Cell constant |
0.01/cm, 0.1/cm, 1.0/cm |
0.01/cm, 0.1/cm, 1.0/cm, 10.0/cm |
0.01/cm, 0.1/cm, 1.0/cm, 10.0/cm |
0.01/cm, 0.1/cm, |
| Temperature interval |
0-105°C
With option 60: 0-200°C |
0-100ºС |
Options-11, 12,-13: 0- 105ºC (32 – 221ºF), sterilization up to 135ºС (275ºF) |
Option-16: 0-60ºC (32-140ºF)
Options-17: 0-100ºC ( 32-212ºF) |
| Pressure Max. |
250 psi² (1825kPa) |
200 psi ² (1481kPa) maximum extension pressure 64 psi², (542 kPa) |
250 psi² (1825kPa) |
Option-16: 100 psi² (791 kPa) at 77ºF (25ºC 20 psi² (239 kPa at 140ºF (60ºC)
Option-17: 100 psi² (791 kPa) |
| Wetted materials |
Titanium, 316 stainless steel, PEEK, EPDM
|
Options -11, -12, -13: Titanium, 316 stainless steel, PEEK, EPDM, graphite, neoprene
Option-14: graphite, 316 stainless steel, Ероху, EPDM, neoprene |
Titanium, 316
stainless steel, Kel-F, EPDM |
Option -16: Titanium, PEEK, PVC, EPDM, polyethylen
Option-17: Titanium, 303
stainless steel, PEEK, EPDM |
| Mounting type |
Cut-in |
Extendable (without process shutdown) |
Sanitary flange |
In-flow (low flow) |
| In-built cable |
10 feet (3.1m)
standard
*additional 50 feet (15.2 m) |
10 feet (3.1m)
standard
*longer length available |
10 feet (3.1m)
standard *additional 50 feet (15.2 m) with terminal box option -60 |
10 feet (3.1m)
standard
*additional 50 feet (15.2 m) |
| Process connection |
¾ ′′ MNPT |
1-¼ ′′ MNPT
ball valve |
-20 1-½ ′′ sanitary flange
-21 2′′ sanitary flange |
3/8 ′′ serrated nozzle for plastic pipeline or ¼ ′′ nozzle |
