1056 universal transmitter for water analysis

Description
Table

Due to modular design, double-channel 1056 transmitter can be used with one or two senors simultaneously that allows to save panel space significantly.
The device supports the following types of sensors:

– pH/ORP Sensors;

– Contact conductivity sensors;

– Dissolved chlorine sensors;

Dissolved oxygen sensors;

Multifunction device allows to take various measurements for industrial, commercial and municipal purposes.

Modular design allows to replace signal boards in situ and makes device reconfiguring easy. All calibration and programming information is displayed on the screen.

Transmitter hasin-built preamplifier with SMART technology for electrochemical analog sensors.

Technological information and specifications
Casing material	Polycarbonate. NEMA 4X/CSA 4
Dust and moisture protection	IP65
Cable conduit openings	It is possible to use ½ inch fitting or PG13.5.
Display	Monochrome graphic LCD. Resolution: 128 x 96 pxl. Display backlight. Active display surface: 58 x 78 mm (2.3 x 3.0 inch).
Ambient temperature and humidity	From 0 to 55 C, relative humidity from 5 to 95% (without condensation).
Storage temperature	from -20 to 60 С
Power supply and output signals	Optional	01	115/230 VAC, 50/60 Hz
		02	24 VDC and 4 signaling relays
		03	Switch-selectable AC 85-265VAC, 50/60 Hz, 4 signaling relays
		AN	4-20 mA current output.
		DP	Profibus DP Digital Communication + 4-20мА
		HT	HART® Digital Communication + 4-20мА
Input	One of two insulated sensor inputs.
Accuracy of current output	± 0.05 mA at 25 °C
Camp connection specifications	Power socket (3 outputs): 24-12 AWG wires. Connector blocks on signal board: 26-16 AWG wires. Power socket connectors (4 outputs): 24-16 AWG wires. Connector blocks on signal relay: 24-12 AWG wires.
Weight/shipping weight	(rounded to 0.5 kg): 1.5 /2.0 kg
Dimension	155 x 155 x 131 mm